超声速无隔道进气道应用前景的初步研究

doi:10.13675/j.cnki. tjjs. 180583

推进技术 ›› 2019, Vol. 40 ›› Issue (9): 1933-1943.DOI: 10.13675/j.cnki. tjjs. 180583

超声速无隔道进气道应用前景的初步研究

武亚君¹,朱守梅²,崔佃飞¹

1.北京动力机械研究所，北京 100074;2.北京动力机械研究所高超声速冲压发动机技术重点实验室，北京;100074

发布日期:2021-08-15

Research on Application Prospect of DiverterlessSupersonic Inlet

1.Beijing Power Machinery Institute,Beijing 100074,China;2.Science and Technology on Scramjet Laboratory,Beijing Power Machinery Institute ,Beijing 100074,China

Published:2021-08-15

摘要/Abstract

摘要： 随着飞行速度的不断提高，工程中对飞行器包络约束和减阻减重提出了更高的要求，为满足当前工程应用中的迫切需求，以一有隔道进气道为研究背景，对无隔道进气道于超声速领域的应用前景进行初步探索。主要开展了传统和新型两型无隔道进气道的设计研究工作，通过数值计算的方法得到其气动性能和阻力性能的收益变化（传统无隔道进气道在Ma2.2~Ma3.5下总压恢复系数下降5%~7%,额定及超额定状态下减阻约13%~21%；新型无隔道进气道在Ma2.2~Ma3.0总压恢复系数下降2.8%~6.5%，Ma3.5下提升2%，Ma2.2~Ma3.5飞行器减阻约2%~10%），并对其工作机理及流场结构进行了详细的分析，以此给出了工程应用的合理化建议：（1）传统无隔道进气道应选取低马赫数作为设计点，避免其处于亚额定状态工作，以保证获取较好的阻力性能。（2）新型无隔道进气道适用于Ma3量级的超声速领域，具有良好的气动与阻力性能。

关键词: 工程应用;减阻;进气道设计;超声速无隔道进气道

Abstract: With the continuous improvement of flight speed, higher requirements are put forward for envelope constraint, drag and weight reduction of aircraft in engineering. In order to meet the urgent need of engineering application, the inlet with diverter was taken as the research background, and a preliminary exploration of the application prospect of diverterless supersonic inlet in the field of supersonic speed was made. The traditional diverterless supersonic inlet and the new type of diverterless supersonic inlet were studied, and the aerodynamic performance and drags were evaluated by numerical computation (The total pressure recovery coefficient of traditional diverterless supersonic inlet is reduced by 5%~7% between Ma2.2 and Ma3.5, and the drag is reduced by 13%~21% at design and overrated design Mach number， the total pressure recovery coefficient of the new type of diverterless supersonic inlet is reduced by 2.8%~6.5% between Ma2.2 and Ma3.0, but increased by 2% at Ma3.5, and drag is reduced by 2%~10% between Ma2.2~Ma3.5), also the working mechanism and flow field structure were analyzed in detail. In conclusion, reasonable suggestions for engineering application were given:(1)The low Mach number is selected as its design point for the traditional diverterless supersonic inlet in engineering application to avoid working in sub-rated condition, ensuring that it can work at rated and overrated condition to obtain good drag performance. (2)The new type of diverterless supersonic inlet applies to supersonic field of Mach 3, with good aerodynamic and drag performance.

Key words: Engineering application;Drag reduction;Inlet design;Diverterless supersonic inlet

武亚君,朱守梅,崔佃飞. 超声速无隔道进气道应用前景的初步研究[J]. 推进技术, 2019, 40(9): 1933-1943.

WU Ya-jun¹,ZHU Shou-mei²,CUI Dian-fei¹. Research on Application Prospect of DiverterlessSupersonic Inlet[J]. Journal of Propulsion Technology, 2019, 40(9): 1933-1943.

参考文献

[1] Gridley M C, Walker Steven H. Inlet and Nozzle Technology for 21st Century Fighter Aircraft[R]. ASME 96-GT-244.
[2] Gridley M C， CahillM J. ACIS Air Induction System Trade Study[M]. US:National Press Club， 2000.
[3] Tillotson B， Loth E， Dutton J， et al. Experimental Study of a Mach 3 Bump-Compression Flowfield[J]. Journal of Propulsion and Power， 2006， 25（3）： 545-554.
[4] 梁德旺，李博. 无隔道进气道反设计及附面层排除机理分析[J]. 航空学报， 2005， 26（3）.
[5] 钟易成，余少志，吴晴. 凸包进气道/DSI模型设计及气动特性研究[J]. 航空动力学报， 2005， 20（5）.
[6] 李博，梁德旺. 无隔道超音速进气道/前机身一体化计算与试验[J]. 航空学报， 2009， 30（9）： 1597-1604.
[7] 杨应凯. 枭龙飞机Bump 进气道设计[J]. 南京航空航天大学学报， 2007， 39(4): 449-452.
[8] 夏杨，李博，王海朋. 一种两侧布局的无隔道亚声速进气道流场特性[J]. 航空动力学报， 2013， 28（2）.
[9] 尹方，王家启，乔盛德. 无附面层隔道超音速进气道设计技术研究[J]. 飞机工程， 2006，（1）： 25-27.
[10] 蒋武根，彭云晖，李博. 一种两侧布局的亚声速无人机进气道流场特性[J]. 航空动力学报， 2011， 26（11）： 2549-2555.
[11] 谢文忠，谭慧俊. 腹下无隔道大偏距S弯进气道流场特性[J]. 航空学报， 2008， 29（6）： 1453-1459.
[12] 杨应凯. Bump进气道设计与试验研究[J]. 空气动力学报， 2007， 25（3）.
[13] 谭慧俊，郭荣伟. 一种背负式无附面层隔道进气道的数值模拟研究与实验验证[J]. 航空学报， 2004， 25（6）.
[14] Masud J， Akram F. Flow Field and Performance Analysis of an Integrated Diverterless Supersonic Inlet[R]. AIAA2010-481.
[15] Kim S D， Song D J. A Numerical Analysis on Three-Dimensional Flow Field in a Supersonic Bump Inlet[J]. KSME International Journal， 2007， 21（2）： 327-335.
[16] 潘瑾，张堃元，金志光. 弯曲激波压缩型面的设计及数值分析[J]. 推进技术， 2008， 29（4）： 438-442.
[17] 向有志，张堃元，王磊，等. 壁面压升可控的高超轴对称进气道优化设计[J]. 航空动力学报， 2011， 26（10）.

超声速无隔道进气道应用前景的初步研究

Research on Application Prospect of DiverterlessSupersonic Inlet

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价